The Dev Team did it yet again! The cat and mouse game is on! All iPhone 3G owners (no matter what firmware you have) can now unlock their devices!
Lets get started with a step by step guide (It will be a short one this time around!)
1) Update your iPhone 3G to 3.0 . You have two options here :
- redsn0w (DIY Quick!)
- Pwnage Tool (Download the Custom Firmware 3.0 if you want to Jailbreak directly without messing with other tools)
2) Now that you performed the Jailbreak steps necessary in Step 1, all you have to do is pop in your SIM card(be it T-Mobile or any other GSM carrier).
- Turn WiFi ‘On’ on your iPhone 3G and connect to a Wireless Access point (WiFi). (Create an AdHoc WiFi Access point if there is no WiFi access)
- Disable 3G on your iPhone if you are on an unsupported frequency (T-Mobile). Other carriers, try disabling and then enable once unlocked!

- Launch Cydia on your iPhone 3G and download the necessary upgrades if prompted and hit ‘Restart Springboard’ when done.


- Tap on ‘Manage’ at the bottom and choose ‘Sources’. Now hit the Edit button at the top right corner and now hit the Add button.

- Enter repo666.ultrasn0w.com when prompted with ‘Enter Cydia/APT URL’ dialog and hit the ‘Add Source’ button.

- Once it refreshes, return to Cydia and hit the ‘Done’ button and tap the top most entry shown.
- Now tap Ultrasn0w -> choose the install button and Confirm. Now return to the main menu in Cydia.



- Restart your iPhone and boom, you should see your carrier signal!












Pretty nice post. I just stumbled upon your blog and wanted to say
that I’ve really enjoyed browsing your posts. Any way
I’ll be subscribing to your blog and I hope you write again soon!
ok, it so good and u so pretty
Pretty?! I am a guy!
Thank u Kiran. U rock!
im currently using a jailbroken 2.1
will the above method allow me to update to 3.0, jailbroken, without deleting my smses?
im using iphone 3G and Vista. thanks! (:
You have to backup all your data via iTunes first. This restore is going to wipe the data clean…
Sent from my iPhone
i just used another set of iphone to update to 3.0, and all my information were intact. but i cannot figure how to jailbreak this iphone. this one hasnt been jailbroken before btw.
Update is different from restore.
Just follow the custom firmware guide step by step and you should be all set. Backup your data though…
Sent from my iPhone
i dont exactly get you i am sorry, right now i am trying to jailbreak a phone that hasnt been jailbroken before and it has been updated to 3.0 already.
yet, i cannot seem to use redsn0w to jailbreak because i cannot browse the ipsw for my current firmware, i cant find the update i downloaded from itunes.
You shouls enable 'view hidden files' and then follow the path mentioned in that guide to get to that ipsw file…
okay, i got it done. somehowww all my data were intact. (: thanks alot.
now im trying it on the iphone that was jailbroken. (: wish me luck
Good luck! Hope it worked for you!
hey, i just did it and its working perfectly fine.
but i have no idea how do i download applications online to put into my iphone, for example from http://appulo.us/appdb/
do you have any guides how to do it?
if its OpenSSH, i cant seem to get it to work. i have no idea why, maybe your guide may be more useful to me.
you cant help me with this?
Hi! I don't support installous or pirated apps on my site. It hurts the developers a lot. You can alway google it. You need to add a new source in Cydia : "cydia.installo.us" … That is the best I can help with!
alrite, im sorry about that. anybody who can help me with that pls contact me @ lazer_boyz@hotmail.com. thanks (:
hi. my iphone 3g has firmware 2.30 ,OS 2.2.1 with bootloader 6.02 (XP). Do the steps above apply to my phone? Currently i cannot use my phone, it cant detect the sim card, even it has turbo sim.
Firstly throw the turbo sim away. Perform the steps in order and you should be able to unlock it…
Sent from my iPhone
Hi. Ive followed the steps. My iphone still cannot detect the sim card. Im using a local sim here in the Phiippines. Also, I notice the pictures inside the camera roll are blank. I have a problem with the photos and vidoes , i cannot delete them. (this problem already existed even before i did the steps above.) Wonder if it affected the ultrasn0w. What should i do?
Best bet : Restore to official firmware 3.0 via iTunes. Now try jailbreaking it afresh. ultrasn0w should work great!
already did it twice. restored firmware 3.0 via iTunes. Then ran the steps above. Still didnt work. what may be the problem? I have talked to the iphone community here in the Philippines, ultrasn0w worked fine for them.
I already removed the turbo sim, btw.
Did you manually perform the jailbreak using redsn0w?
yes. i performed the exact steps mentioned above. jailbreak using redsn0w then ultrasn0w to unlock.
No, sim solution cannot be installed on your phone. Please tell me the operating system of your computer, firmware you are on right now and the baseband version.
Sent from my iPhone
version 3.0 (7A341) firmware 04.26.08. i dont know my bootloader now. Before i upgrade to 3.0, my bootloader was 6.02
hi. have you figure out what's wrong with my iphone? thanks for your help
Did you try my last suggestion?
Sent from my iPhone
yes. i used redsn0w to jailbreak then ultrasn0w to unlock.
is it possible my iphone has sim solution installed inside my hardware? dats y ultrasn0w wont work? how can i check it?
hi. i've followed the steps above. My iphone still cant detech the sim card. By the way, Im using it here in the Philippines using a local sim. What should i do?
Iphone 3g FW: 3.0 Windows Vista home edition 32-bit
This did nothing for me, I went by way of custom firmware and installed ultrasn0w and it still says no service. Is it because I am trying to use an at&t sim card?? if I were to put a t-mobile sim card in would it work??
Thanks much
Ultrasn0w will still work with ATT. I would suggest you uninstall ultrasn0w and then check for signal.
Tmobile works just fine with ultrasn0w…
Sent from my iPhone
I was trying to activate my iphone 3g 3.0 for sooo long! So many unsuccefull ways to do it! Finally did it!!
Thank you so much!
Yay! Congratulations!
Sent from my iPhone
I did this on Vista and it worked 1st time!!!!
Congratulations!Many things failed when I tried them first time when it comes to hacking them and posting results here! You are lucky!
superb and simple instruction, even a technophobe like me managed to unlock and activate my phone without the help from my 9yr old daughter,she's obsolete now lol, but now i have a bigger problem ,the phones IMEI number must be blocked as i cant use the phone to ring out or in….any of you lovely folk got a way out of it
I didn't understand the problem. How do you know the IMEI is blocked? I have never heard of such thing on an iPhone. Do you see no service or do you see a signal?
i have a full signal bar and service provider logo im just guessing its IMEI is blocked as that is what happens with cell phones
kkiran i have a full signalbar and my service provider (T-Mobile) logo is in the in the corner and im just guessing it must be the IMEI thats blocked, as i found the phone and didnt buy it
Hi Kiran , I have 3g iPhone 8gb . Os3.0 . I jail break with redsnow after that I can’t find the wifi and camera . So that I can’t download ultrasnow . I used frmwr downloaded from iclarified site which they sead frmwr for iPhone 3g os 3 . I don’t konw I did any wrong with this . I did like I upgrade through iTunes 8.2.1 then I open redsnow and brows and select the downloaded frmwr and I folow the redsnow snow that finished fine .after that I sec with iTunes . Only one time wifi show wifi and seddonly discont . Then no more wifi . Then I don’t know what I have to do . Pls if u can help mail me to shaahi@live.com
i have iphone 3g s 3.0 firmware>>>>>computer running windows vista>>>>>>my iphone was jailbreak using purplera1n and was working well untill 2days ago stopped>>>>>>i download another purplera1 and after the installation my phone has no ICCID>>>>>>>>no firmware>>>>>>no bluetooh etc the phone is useless now please I need help please attached is the log
How can I get my >>>ICCID>>firmware>> bluetooh>>wifi >>Network>>>back
INFO: welcome to purplera1n for windows
INFO: loaded dll at C:Program FilesCommon FilesAppleMobile Device SupportbiniTunesMobileDevice.dll
INFO: button clicked
INFO: callbacks registered
INFO: internal recovery callback called
INFO: unregistered normal mode callback
INFO: go go gadget ra1n
INFO: said hi
INFO: sent exp1
INFO: uploading payload
INFO: usb file is \?USB#VID_05AC&PID_1281#CPID:8920_CPRV:14_CPFM:03_SCEP:02_BDID:00_ECID:0000030B4A051D4F_IBFL:01_SRNM:[879240BL3NR]#{ED82A167-D61A-4AF6-9AB6-11E52236C576}IB0000
INFO: running the geohot command
INFO: I JUST DROPPED IT LIKE ITS HOT
WARN: wtf who called this?
INFO: global callback finished
***
INFO: welcome to purplera1n for windows
INFO: loaded dll at C:Program FilesCommon FilesAppleMobile Device SupportbiniTunesMobileDevice.dll
INFO: button clicked
INFO: internal recovery callback called
INFO: unregistered normal mode callback
INFO: go go gadget ra1n
INFO: said hi
INFO: sent exp1
INFO: uploading payload
INFO: usb file is \?USB#VID_05AC&PID_1281#CPID:8920_CPRV:14_CPFM:03_SCEP:02_BDID:00_ECID:0000030B4A051D4F_IBFL:01_SRNM:[879240BL3NR]#{ED82A167-D61A-4AF6-9AB6-11E52236C576}IB0000
INFO: running the geohot command
INFO: I JUST DROPPED IT LIKE ITS HOT
WARN: wtf who called this?
INFO: global callback finished
INFO: callbacks registered
INFO: unused callback called
***
INFO: welcome to purplera1n for windows
INFO: loaded dll at C:Program FilesCommon FilesAppleMobile Device SupportbiniTunesMobileDevice.dll
INFO: button clicked
INFO: callbacks registered
INFO: internal recovery callback called
INFO: unregistered normal mode callback
INFO: go go gadget ra1n
INFO: said hi
INFO: sent exp1
INFO: uploading payload
INFO: usb file is \?USB#VID_05AC&PID_1281#CPID:8920_CPRV:14_CPFM:03_SCEP:02_BDID:00_ECID:0000030B4A051D4F_IBFL:01_SRNM:[879240BL3NR]#{ED82A167-D61A-4AF6-9AB6-11E52236C576}IB0000
INFO: running the geohot command
INFO: I JUST DROPPED IT LIKE ITS HOT
WARN: wtf who called this?
INFO: global callback finished
INFO: unused callback called
INFO: internal recovery callback called
INFO: unregistered normal mode callback
INFO: go go gadget ra1n
INFO: said hi
INFO: sent exp1
INFO: uploading payload
INFO: usb file is \?USB#VID_05AC&PID_1281#CPID:8920_CPRV:14_CPFM:03_SCEP:02_BDID:00_ECID:0000030B4A051D4F_IBFL:01_SRNM:[879240BL3NR]#{ED82A167-D61A-4AF6-9AB6-11E52236C576}IB0000
absolutely brilliant!!
than u it works like a charm!!!
I am glad! Mission accomplished!! Enjoy your iPhone 🙂
after i unlocked my iphone 3g os 3.0 using ultrasn0w i couldn't get any signal i need help can somebody help me please email me if you can khatatbih@aol.com
What is the baseband firmware version in settings -> general -> about ?
OK so everything works but i no see Carrier NAME. signal bars OK phone works so no wories. but… no carrier name on homescreen.
That is a known issue for 3.1 firmware. Try ignoring it!
yo great man,
I hv iPhone 3g v3.1[7C144] modemFW05.11.07 bootloader05.09[G2M3S2]
Do these procedures work on mine????????